Fastener Depth Control Adjustment; Removing Nails, Directional Exhaust - Bostitch N88RH-2MCN Operation And Maintenance Manual

FASTENER DEPTH CONTROL ADJUSTMENT - N88RH-2MCN
When using the framing contact arm:
The Fastener Depth Control Adjustment feature provides control of the nail drive depth from flush with or just
above the work surface to shallow or deep countersink.
TO ADJUST THE FASTENER DEPTH CONTROL:
DISCONNECT TOOL FROM AIR SUPPLY BEFORE ATTEMPTING ANY PARTS DISASSEMBLY
AND BEFORE CHANGING THE WORK CONTACTING ELEMENT ADJUSTMENT.
1. Push in on locking button.
2. Adjust contact arm up to increase depth
of drive or down to decrease it.
3. Release locking button
Note: Metal Connector Attachment
is not adjustable for depth control.
The adjustable exhaust deflector can be rotated into any desired position by hand without the use of any tools.
N88RH-2MCN
1. Pull pusher back until it engages latch.
2. Slide nails back to opening and push out.
ADJUST
DIRECTIONAL EXHAUST DEFLECTOR
Exhaust Deflector
LOCKING BUTTON
CONTACT ARM
REMOVING NAILS
7
PUSH IN
RELEASE
2
1