Table of Contents
Advertisement
This page includes the following settings:
Enable Radio
Enables the wireless section of your LAN. When disabled, no wireless clients can have access
to either the Internet or other clients on your wired or wireless LAN.
Radio Band
(Applies to the R1 10 only.) Allows you to select the band of your wireless network. The R1 10 can
operate in the 2.4 GHz band (for 802.1 1b/g/n) or the 5 GHz band (for 802.1 1a/n). The R1 10
does not support concurrent operation at 2.4 GHz and 5 GHz.
Radio Mode
For 2.4 GHz, the R1 10 and R120 support the 802.1 1b, 802.1 1g, and 802.1 1n wireless
standards. This option allows you to select whether the router will operate in 802.1 1b/g mode,
802.1 1b/g/n mode, or 802.1 1n mode only.
For 5 GHz, the R1 10 supports the 802.1 1a and 802.1 1n wireless standards. This option allows
you to select whether the router will operate in 802.1 1a only mode, 802.1 1n only mode, or
802.1 1a/n mode. The R120 also supports the 802.1 1ac wireless standard and allows the
selection of an 802.1 1ac/n/a operating mode.
Select a 2.4 GHz radio mode for the R1 10 and R120.
•
1 1b/g Mixed: Up to 1 1 Mbps for 802.1 1b and 54 Mbps for 802.1 1g.
•
1 1b/g/n Mixed: Up to 1 1 Mbps for 802.1 1b, 54 Mbps for 802.1 1g, and 450 Mbps for
802.1 1n. If support for 802.1 1b/g is not required, it is recommended that you choose the
802.1 1n-only mode.
Basic wireless settings
47
Advertisement
Table of Contents
