Step 4: Summary - HP R100-Series Configuration And Administration Manual

Wireless vpn routers
Hide thumbs Also See for R100-Series:
Table of Contents

Advertisement

SSID
Enter a unique name to identify your wireless network.
By default, a wireless community with an SSID of HP1 is defined on the R1 10.
By default, two wireless communities with SSIDs of HPT1_2G and HP1_5G are defined
on the R120.
For more information, see
Note
The R1 10/R120 allows you to create up to four wireless communities per radio.
MAC Authentication, Authentication Mode, and Encryption Type
Configure wireless security for the default wireless community. The R1 10/R120 has no wireless
security configured by default. HP recommends that WPA2 be configured for maximum
security. Leaving the Authentication Mode setting as Open or using WEP security is not
recommended.
For more information on wireless security, see

Step 4: Summary

After you complete the Wizard Setup, the Summary page displays.
Confirm the settings, and then click Finish. The router reboots and the HP R1 10/R120 is
operational.
16
Using the Wizard Setup
"Basic wireless settings" on page
"Configuring wireless security" on page
46.
49.

Advertisement

Table of Contents
loading

Table of Contents