Table of Contents
Advertisement
6 Wireless configuration
The wireless settings section displays configuration settings for the access point functionality of
the router. The sections include configuration options for radio signal characteristics, wireless
security features, Wireless Distribution System (WDS), Wi-Fi Protected Setup (WPS), Wi-Fi
Multimedia (WMM), and MAC authentication.
The R1 10 router features a single dual-band radio for 2.4 GHz or 5 GHz operation. The R120
router features two radios, one for 2.4 GHz and one for 5 GHz operation. This means that the
R1 10 can operate at 2.4 GHz or 5 GHz, but not both at the same time. The R120 can operate
concurrently at 2.4 GHz and 5 GHz.
The R1 10 router has a single configuration page for 2.4 GHz or 5 GHz operation. The R120
router has separate configuration pages for 2.4 GHz and 5 GHz operation.
Note
The router supports a maximum of 64 wireless clients per radio.
Viewing wireless interface status
The Status page displays the current status of radio settings, including operating frequency,
mode, and channel, as well as specific SSID settings.
Note
The web interface examples in this chapter show the R1 10, the web pages for the R120 are
slightly different.
Advertisement
Table of Contents
