Table of Contents
Advertisement
On the Add VLAN page, you can set the parameters to configure the behavior of VLANs.
This page includes the following settings:
Name
A text description of the VLAN. Do not use these characters: ` " & ' # \
IP Address
The IP address of the VLAN interface.
Subnet Mask
The subnet mask of the VLAN interface.
Enable NAT
Enables the NAT feature for the VLAN interface.
Enable IGMP Snooping
Enables the feature that blocks unnecessary IP multicast traffic from flooding VLAN ports
without a specific multicast membership. This feature is works by inspecting IGMP join/leave
messages from VLAN ports to update the bridge forwarding database. IGMP Snooping is
extremely useful in saving bandwidth of low-speed interfaces to improve network utilization.
Enable DHCP Server
Enables the automatic assignment of IP addresses to clients on the VLAN.
IP Pool Starting/Ending Address
Sets the IP addresses to use for automatic assignment. You can click Auto IP Range to
automatically set a valid range of pool addresses.
Lease Time
The amount of time a client can use its assigned IP address before requesting for it to be
renewed.
VLAN ID
The ID number of the VLAN.
42
LAN configuration
Advertisement
Table of Contents
