Table of Contents
Advertisement
To configure Proxy ARP, set the following options:
Enable ARP Proxy
Enables the feature on the router.
Name
A name (1 to 31 alphanumeric or special characters) that describes the Proxy ARP service. Do
not use these characters: ` " & ' # \
Popular Services
Selects common protocols that identify traffic that can be forwarded through the router to a host
computer on the local LAN.
Type
Selects TCP or UDP as the protocol type, or other special protocols. When Special Protocol is
selected, the protocol numbers can be entered in the Protocol field.
Port(s)
Specifies the TCP/UDP port numbers. More than one number can be entered separated by
commas.
Protocol(s)
Specifies special protocol numbers, separated by commas.
IP Address Of Public Hosts In LAN
The IP address of a computer on the local LAN. The IP address and mask can define a range of
addresses. For example, the IP address 10.8.0.100 with a mask 255.255.255.252 specifies
addresses in the range10.8.0.100 to10.8.0.103.
Subnet Mask Of Public Hosts In LAN
The local subnet mask for the IP address.
Rules Name
Applies a schedule rule to the Proxy ARP service. The schedule rules are configured on the
Tools > Scheduling page.
26
Managing the HP R110/R120 system
Advertisement
Table of Contents
