Download  Print this page

Maintenance; Block Diagram - Simadre CT5200D Owner's Manual

3 - in - 1 tig welder; stick welder; plasma cutter.
Hide thumbs

Advertisement

MAINTENANCE

The following should be performed about 6 month intervals in a normal environment, or
at weekly intervals if the machine is kept or used in an excessively dusty environment:
First disconnect the machine from the electrical supply, then blow out any
accumulated dust in the machine using dry compressed air.
Any attempt to open the CT5200D/DX will void the warranty. If the machine stops
working properly and the troubleshooting steps do not fix the problem, contact your local
dealer or the Simadre TECHS customer service for advice.

Block Diagram

Plasma Gun
TIG Torch
MMA rod

Advertisement

Table of Contents

This manual is also suitable for:

Ct5200dx

Comments to this Manuals

Symbols: 0
Latest comments: