Download  Print this page

Operation - Simadre CT5200D Owner's Manual

3 - in - 1 tig welder; stick welder; plasma cutter.
Hide thumbs

Advertisement

The CT5200D/DX cooling fan requires good air flow. The equipment may overheat if it
is operated in a small closed area such as a cabinet or closet.

OPERATION

The current, post time, and air or gas pressure settings recommended here are for initial
setup. You will adjust those parameters differently according to workpiece thickness,
material, and operating mode.
TIG welding
TIG welding is for relatively thin materials, 1/8" thick or less. For thicker
materials, use the MMA welding function.
Figure 5: TIG torch disassembled

Advertisement

Table of Contents

This manual is also suitable for:

Ct5200dx

Comments to this Manuals

Symbols: 0
Latest comments: