Performance Checklist; Control Panels - Viking Custom Front series Installation Manual

Performance Checklist

h Align/square door(s).
h Verify cabinet size.
h Verify drain pan is properly installed and
h Verify electrical supply and water supply
(if applicable).
h Install anti-tip device(s) and verify unit is h Install kickplate.
secure.
h Remove internal packaging and labels
h Position unit in cutout, level at desired
height and secure unit.
Installer's information:
h Plug-in unit and verify operation.
h Connect water supply (if applicable).
Installer's Name:
• Verify icemaker fill tube is properly
inserted.
Installer's Company:
• Verify icemaker bail arm is down.
• Verify dispenser operation
Date: ________________________________________
(if applicable).
64
there are no leaks on water connection.
and wipe unit down.
_____________________________
_________________________
Verify Operations

Control Panels

Bottom Mount
FRZ COLDEST FRZ
. . . . . . . . . . .
TEMP TEMP
DISPLAY FRZ REF HIGHER LOWER
ON TEMP TEMP TEMP TEMP
DOOR OPEN
Side by Side
FRZ . . . . . . . . . . . COLDEST FRZ
TEMP TEMP
DISPLAY FRZ REF HIGHER LOWER
ON TEMP TEMP TEMP TEMP
DOOR OPEN
1. Press "Display On" or "Activate Controls" pad
2. Verify unit is not in Sabbath Mode
If in Sabbath Mode:
D
A. The Sabbath Mode will disable the interior lights, display (except 3 blue squares) and alarm. (See
picture below for visual indication of Sabbath Mode)
FRZ COLDEST FRZ
. . . . . . . . . . .
TEMP TEMP
D
DOOR OPEN
F
To exit the Sabbath Mode:
B. Press & Hold "Display On" or "Activate Controls" and then "Display Off" for 3 seconds. (The
control will beep 3 times to alert the user the Sabbath Mode has been exited)
3. Verify unit is not in Showroom Mode
If in Showroom Mode:
A. The Showroom Mode will disable the refrigerator system but all other functions are normal. These
include lights and control. (See picture below for visual indication of Showroom Mode)
FRZ COLDEST FRZ
. . . . . . . . . . .
TEMP TEMP
DOOR OPEN
To exit Showroom Mode:
B. Press & Hold "Display On" or "Activate Controls"; while holding, press and hold "Higher Temp"
and "Alarm Off" together. (The control will beep 3 times to alert the user that Showroom Mode
has been exited)
4. Press "Max Frz" & "Display Off" at the same time and hold until beeps (force start compressor).
5. All models need to be set at the 5th bar for Refrigerator & Freezer - factory setting.
65
HIGH MAX MAX
TEMP REF FRZ
HIDDEN MAX MAX ALARM DISPLAY
BUTTON REF FRZ OFF OFF
HIGH MAX MAX
TEMP REF FRZ
HIDDEN MAX MAX ALARM DISPLAY
BUTTON REF FRZ OFF OFF
HIGH MAX MAX
TEMP REF FRZ
HIGH MAX MAX
TEMP REF FRZ