Table Of Contents - Viking Custom Front series Installation Manual

Table of Contents

Advertisement

Table of Contents

Warnings and Important Information
Unpacking & Moving
IMPORTANT-
• Make sure that incoming voltage is the same
1
as unit rating. An electric rating plate
specifying voltage, frequency, wattage,
2
amperage, and phase is attached to the
3
4
product.
5
6
• To reduce the risk of fire, electrical shock, or
7
injury to persons, installation work and
8
electrical wiring must be done by qualified
people in accordance with all applicable
9
codes and standards, including fire-rated
10
construction.
11
12
• The installer should leave these instructions
13
with the consumer who should retain them for
14
15
local inspector's use and for future reference.
16
17
It is your responsibility to:
18
• Comply with installation specifications and
19
dimensions.
• Properly install unit.
20
• Remove any moldings or decorative panels
21
that prevent the unit from being serviced.
22
• Make sure that you have these materials (not
23
24
provided with your unit), which are necessary
25
for proper installation:
26
•1/4" (6 mm) copper tubing with shutoff
27
valve
28
•6- #8 x 3" (7.6 cm) wood screws (longer
29
screws may be required)
30
31
•1- Saddle valve (do not use self-piercing
32
feature of the valve)
33
• Assure that floor will support unit, door
34
panels and contents (approximately 1200
35
pounds [540 kg]).
36
37
• Provide a properly grounded electrical outlet.
38
• Assure that location will permit appliance
39
doors to open a minimum of 90˚.
40
41
42
43
44
45
ELECTRICAL SHOCK HAZARD
46
Disconnect power or turn
47
48
power disconnect switch to
49
OFF position before removing
50
top grille. Failure to do so can
51
52
result in death or electric shock.
53
54
55
56
Most of the unit's weight is at the top. Extra care is needed when moving the unit to prevent tipping.
57
Use cardboard shipping material or plywood under unit until it is installed in the operating position
58
to protect floor surface.
59
60
61
Please Read and Follow
Your safety and the safety of others is
very important.
We have provided many important safety
messages in this manual and on your
appliance. Always read and obey all
safety messages.
This is the safety alert symbol. This
symbol alerts to hazards that can
result in injury or death to you and
others.
All safety messages will be preceded by the
safety alert symbol and the word"DANGER"
or "WARNING." These words mean:
Failure to follow these instructions can
result in serious injury or death.
W A R N I N G
Failure to follow these instructions can
result in serious injury or death.
All safety messages will identify the
hazard, tell you how to reduce the chance
of injury, and tell you what can happen if
the instructions are not followed.
W A R N I N G
TIP OVER HAZARD
Appliance is top heavy
W A R N I N G
and tips easily when not
completely installed.
Keep doors closed until
appliance is completely installed and
secured per installation instructions.
Use two or more people to move and install
appliance. Failure to do so can result in death
or serious injury.
1
D A N G E R

Advertisement

Table of Contents
loading

Table of Contents