Performance Checklist; Control Panel - Viking VBI7360 Installation Manual

Performance Checklist

—Verify cabinet size.
— Verify electrical supply and water supply (if applicable).
— Install anti-tip device(s) and verify unit is secure.
— Position unit in cutout, level at desired height and secure unit.
—Plug-in unit and verify operation.
—Connect water supply (if applicable).
• Verify icemaker fi ll tube is properly inserted.
• Verify icemaker bail arm is down.
• Verify dispenser operation (if applicable).
—Align/square door(s).
— Verify drain pan is properly installed and there are no leaks on
water connection.
—Install kickplate.
— Remove internal packaging and labels and wipe unit down.
Verify Operations

Control Panel

1. When unit is fi rst plugged in, the display will fl ash. "PL". Press the refrigerator select button twice to initiate
display.
2. Verify unit is not in Sabbath Mode.
If in Sabbath Mode:
A. The Sabbath Mode will disable the interior lights, display (except SAB indicator,
temperature and compartment indicator) and alarm. If in Sabbath Mode, SAB will be lit.
To exit the Sabbath Mode:
B. Press and hold SAB button for 3 seconds
3. Verify unit is not in Showroom Mode.
If in Showroom Mode:
A. The Showroom Mode will disable the refrigerator system but all other functions are
normal. These include lights and control. If the refrigerator is in Showroom Mode,
SHOW ROOM will be lit.
To exit Showroom Mode:
B. Press and hold SHOW ROOM button for 3 seconds
4. All models are set at 39° F and 0° F for the refrigerator and freezer respectfully - factory setting. Wait 24 hours
before changing temperatures.
20
20