Boot Device Configuration; Scsi Device Configuration Menu - Intel DK440LX Product Manual

SCSI Support

Boot Device Configuration

Boot Channel
Specifies the SCSI channel from which the computer should boot first. The options are:
•
A First (default)
•
B First
Boot SCSI ID
Specifies the SCSI ID of the device from which you wish to boot. The options are ID 0–15. The
default is ID 0.
The SCSI ID selected here must correspond to the ID configured on the boot device.
Boot LUN Number
Sets which LUN (Logical Unit Number) to boot from on your boot device if your boot device has
multiple LUNs and Multiple LUN Support is enabled. The options are ID 0–7. The default is
ID 0.

SCSI Device Configuration Menu

These settings enable you to configure each device on the SCSI bus. You must know the SCSI ID
of the device you want to configure.
Initiate Sync Negotiation
When Yes is selected, the motherboard initiates synchronous negotiation with the SCSI device.
When No is selected, the motherboard does not initiate synchronous negotiation. If the SCSI
device initiates synchronous negotiation, the motherboard always responds. The options are:
•
Yes (default)
•
No
Maximum Sync Transfer Rate
Sets the maximum synchronous data transfer rate in MB/second. The motherboard supports
synchronous data transfer rates up to the Ultra Fast SCSI maximum rate of 40 MB/second. The
options are:
•
40.0 (default)
•
32
•
26.8
•
20.0
•
16.0
•
13.4
•
10.0
52