Advertisement
F016 L70 452 - Vorderseite.book Seite 5 Dienstag, 14. November 2006 2:20 14
Fault Finding
The following table gives checks and actions that you can perform if your machine does not operate correctly.
If these do not identify/remedy the problem, contact your service agent.
Warning: Switch off and remove plug from mains before investigating fault.
Symptom
Machine fails to operate
Machine functions
intermittently
Machine labours or belt
squeals
Cutting tines not rotating
Excessive
vibration/noise
Poor collection
16 • F016 L70 452 • 06.11
Possible Cause
Power turned off
Mains socket faulty
Extension cable damaged
Fuse faulty/blown
Extension cable damaged
Machines internal wiring damaged
worn/missing tines
Raking/Scarifing too low
Cutting tines obstructed by gras
Belt is slipping or is damaged
Cutting tines damaged
Raking/scarifing in wet conditions
English - 5
Remedy
Turn power on
Use another socket
Inspect cable, replace if damaged
Replace fuse
Inspect cable, replace if damaged
Contact Service Agent
fit replacment
Increase height of raking
see "Adjusting the operating height"
Clear obstruction
Contact Service Agent
Contact Service Agent
see "Adjusting the operating height"
Advertisement
