Spirit CT850 Owner's Manual page 35

Hide thumbs Also See for CT850:

Table of Contents

Now Message Window is showing "ADJUST AGE THEN PRESS ENTER" with Incline Window blinking. Use Up/Down/

Fast/Slow keys or numeric keys to adjust. Adjusting age will change THR value (as the THR formula described above).

After age is set, press the Enter button again.

Now Message Window is showing "ADJUST BODY WEIGHT THEN PRESS ENTER" with Incline Window blinking. Use

Up/Down/Fast/Slow keys or numeric keys to adjust. After the weight is set, press Enter button again.

Now Message Window is showing "ADJUST HEART RATE THEN PRESS ENTER" with Speed Window blinking. Use

Up/Down/Fast/Slow keys or numeric keys to adjust. After the target heart rate value is set, Press the Enter button

again.

The Message Window is then showing "PRESS START TO BEGIN WORKOUT OR ENTER TO MODIFY". Press Start

button to begin the workout or Stop button to return to the previous screen.

Note: When the Message Window is showing "CHECK PULSE", there is no pulse signal received and the program can not be

performed. Please check and make sure that heart rate strap functions normally.

Safety T ether Cord

•

A safety tether cord is provided with this unit. It is a simple magnetic design that should be used at all times. It is for your

safety should you fall or move too far back on the tread-belt. Pulling this safety tether cord will stop tread-belt

movement. To Use:

Place the magnet into position on the round metal portion of the console control head. Your treadmill will not start

and operate without this. Removing the magnet also secures the treadmill from unauthorized use.

Fasten the plastic clip onto your clothing securely to assure good holding power. Note: The magnet has strong enough

power to minimize accidental, unexpected stopping. The clip should be attached securely to make certain it does not

come off. Be familiar with its

function and limitations. The treadmill will stop, depending on speed, with a one to two step coast anytime the magnet

is pulled off the console. Use the Stop / Pause switch in normal operation.

Table of Contents

Show Quick Links

Table of Contents