Spirit CT850 Owner's Manual page 12

CT850 STEP THREE
10
HARDWARE FOR STEP 3
PART TYPE DESCRIPTION
117 SPLIT WASHER 3/8"X16.5X2.0T
125 FLAT WASHER 3/8"X25X2T
145 BOLT 3/8"X3/4"
146 BOLT M8X12
1. Gather HARDWARE FOR STEP 3.
2. Use 6 SOCKET HEAD CAP BOLTS (146) to
secure the console onto the LEFT AND RIGHT
MOUNTING BRACKETS (3-L, 4-R). See photo
below.
3. Connect the Upper COMPUTER CABLE F (41)
to the Lower COMPUTER CABLE A (42).
4. Slide the assembly into the left and right uprights.
5. Slide six SPLIT WASHERS (117) and 6 FLAT
WASHERS (125) onto 6 BUTTON HEAD
SOCKET BOLTS (145) on top of uprights. Be
careful not to pinch the computer cable.
1. When assembling the
CONSOLE MOUNTING
INTERFACE BRACKETS
(3 & 4) please be sure to
slide the brackets all the
way toward the back of the
console before tightening
the bolts.
QTY
6
6
6
6