Spirit CT850 Owner's Manual page 10

CT850 STEP ONE
8
HARDWARE FOR STEP 1
PART TYPE DESCRIPTION
116 FLAT WASHER 3/8"X35X2T
117 SPLIT WASHER 3/8"X16.5X2.0T
134 SCREW M5X12MM
144 BOLT 3/8"X3"
1. Gather HARDWARE FOR STEP 1.
2. The RIGHT UPRIGHT (34) has a preinstalled
Lower COMPUTER CABLE A (42). To install the
uprights on the base frame, special care must be
taken not to pinch the computer cable between
the upright and frame base. Slide the SPLIT
WASHER (117) and FLAT WASHER (116) on
the BUTTON HEAD SOCKET BOLT (144).
Slide the BOLT through the top hole in the
RETAINING PLATE (98), and corresponding
top hole in the upright tube, and screw into the
base frame. Now install the other 4 BUTTON
HEAD SOCKET BOLTS (144) together with
SPLIT WASHERS (117), and FLAT WASHERS
(116) and tighten all 5 bolts up.
3. Repeat this step to install the LEFT UPRIGHT
(33).
4. Attach the LEFT and RIGHT PLASTIC
COVERS (26-L, 27-R) with 4 PHILLIPS HEAD
SCREWS (134).
QTY
10
10
4
10