Steering Link Rod Fasteners - Mercury 135 OptiMax Manual

OUTBOARD INSTALLATION
3. Torque nut to specification.
Description
Nut

Steering Link Rod Fasteners

IMPORTANT: The steering link rod that connects the steering cables to the engine must be fastened
using special washer head bolt (P/N 10-849838) and self-locking nylon insert locknuts (P/N
11-826709113). Never replace locknuts with common nuts (non-locking) as they will work loose/vibrate
off freeing link rod to disengage.
Improper fasteners or improper installation procedures can result in loosening or disengagement of
the steering link rod. This can cause a sudden, unexpected loss of boat control, resulting serious injury
or death due to occupants being thrown within or out of the boat. Always use required components
and follow instructions and torque procedures.
Nm
47.5
WARNING
!
59
3727
lb. in. lb. ft.
35