Electrical, Hoses, And Control Cables - Mercury 135 OptiMax Manual

OUTBOARD INSTALLATION

Electrical, Hoses, and Control Cables

FRONT CLAMP DISASSEMBLY
Remove screws and open the front clamp assembly.
a - Screw (2)
REMOTE WIRING HARNESS
Route the remote 14 pin boat harness through the front clamp. Connect remote harness to the 14 pin
connector on the engine harness.
a - 14 pin connector
BATTERY INFORMATION
Failure to properly secure the battery leads can result in a loss of power to the Digital Throttle and
Shift (DTS) system, leading to serious injury or death due to loss of boat control. Secure the battery
leads to the battery posts with hex nuts to avoid loose connections.
a a
b
b -
a
b -
WARNING
!
65
7644
Front clamp
b
Remote 14 pin boat harness
11033