Because the cord of the baby unit presents
1
a potential strangulation hazard, make sure
that the baby unit and its cord are at least 1
metre/3.5 feet away from your baby.
To prevent a high-pitched sound from one
2
or both units, make sure the parent unit is at
least 1 metre/3.5 feet away from the baby
unit.
4.2 Linking parent unit and
baby unit
Press and hold the on/off button 3 on the
1
baby unit for 2 seconds.
The nightlight, the battery status light and
•
the power-on light go on briefly.
Press and hold the on/off button 3 on the
2
parent unit for 2 seconds.
•
The display goes on and briefly displays all
indicators and symbols. Then the indicators
and symbols fade out and the battery status
indicator appears.
Note:
D
When you switch on the parent unit for
the first time or after a reset, you have to
select your preferred display language (see
'Language' in chapter 'Menu of the parent
unit').
•
The 'link' light on the parent unit starts
flashing red and the message 'I AM
LINKING' appears on the display.
7