Using The Baby Monitor; Linking Parent Unit And Baby Unit - Philips Avent SCD921 User Manual

Using the baby monitor

Linking parent unit and baby unit

1.5s
1 Press the on/off button for 1.5 seconds to turn on the baby unit.
2 When the baby unit is on, the indicator light turns orange for booting-
up�
3 The baby unit is ready for use when the indicator light turns green, you
can now connect it with the parent unit�
4 Make sure that the parent unit and the baby unit are at least
2.5 meters/ 8.2 feet away from each other to avoid acoustic feedback.
- 9 -