Revolving Shelf; Auto Shelf; Two-Way Flexishelf; Adjustable Pockets - Mitsubishi Electric MR-B42S Operating Instructions Manual

Table of Contents

Advertisement

Do not leave food hanging over
shelves or pockets.
Do not place glass bottles
that cannot fit all the way to
the bottom at the front of the
bottle pocket.
Adjustable
The
pocket
(small)
Adjustable
pocket
(large)
Do not attach a case that you
Adjustable
purchased separately onto the
outside of a pocket.
pocket
(medium)
Blue LED
Do not close the door
while food is in front of
the slide chilled case
or the small item
case.
Fully stow away
the cases.
Note
You can move the shelves and pockets
1 Slide the left and right levers to the side to
kee
j
2
After operating the shelf, return it to its original position by
following the procedure in reverse. Then, set the left and right
levers to the lock position to fix the shelf.
 Removing and installing the Revolving Shelf
Move the lever to the left or right to adjust the space
between the shelves.
If the AUTO Shelf disengages, push it back into position from above.
 Removing and installing the AUTO Shelf
1
(One)
2
(Two)
Page 10
(You can also remove them)

Revolving Shelf

release them.
Rotate slowly while holding the edge of the tray.
(The tray can be turned in both directions,
to the left or the right.)
1

AUTO Shelf

down
Two-way flexishelf
As a wide shelf
Halve the shelf width
to store tall objects
2
1
Page 24
up
Page 24

Adjustable pockets

The upper side section has
3 adjustable positions and,
the lower side section, 2
adjustable positions.
1
2
3
1
2
 Removing the pockets
Page 25
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents