Specifications; Before Assembly - Bowflex SelectTech 4.1 Assembly Manual

Hide thumbs Also See for SelectTech 4.1:
Table of Contents

Advertisement

Maximum load limit
This product, its packaging, and components contain chemicals known to the State of
California to cause cancer, birth defects, or reproductive harm. This Notice is provided
in accordance with California's Proposition 65. If you would like additional information,
please refer to our web site at www.nautilus.com/prop65.

Before Assembly

Select the area where you are going to set up and operate your equipment. For safe operation, the location
must be on a hard, level surface. Allow a workout area of minimum 120" x 120" (3 m x 3 m).
Basic Assembly Tips
Follow these basic points when you assemble your equipment:
1. Read and understand the "Important Safety Instructions" before assembly.
2. Collect all the pieces necessary for each assembly step.
3. Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the
left (counterclockwise) to loosen, unless instructed otherwise.
4. When attaching 2 pieces, carefully lift and look through the bolt holes to help insert the bolt through the
holes.

Specifications

60.5"
153.8 cm
480 lbs. (218 kg)
5
19.7"
50 cm
21.1"
53.6 cm

Advertisement

Table of Contents
loading

Table of Contents