Protecting External Outboard Components; Gearcase; Positioning Outboard For Storage; Battery Storage - Mercury 200 OptiMax DTS Manual

Protecting External Outboard Components

• Lubricate all outboard components listed in Maintenance - Inspection and Maintenance
Schedule.
• Touch up any paint nicks. See your dealer for touch-up paint.
• Spray Quicksilver or Mercury Precision Lubricants Corrosion Guard on external metal surfaces
(except corrosion control anodes).
Tube Ref No.
Corrosion Guard
120

Gearcase

• Drain and refill the gearcase lubricant (refer to Maintenance - Gearcase Lubrication).

Positioning Outboard For Storage

Store outboard in an upright (vertical) position to allow water to drain out of outboard.
If outboard is stored tilted up in freezing temperature, trapped cooling water or rain water that may
have entered the propeller exhaust outlet in the gearcase could freeze and cause damage to the
outboard.

Battery Storage

• Follow the battery manufacturer's instructions for storage and recharging.
• Remove the battery from the boat and check water level. Recharge if necessary.
• Store the battery in a cool, dry place.
• Periodically check the water level and recharge the battery during storage.
STORAGE
Description
CAUTION
!
81
Where Used
External metal surfaces
Part No.
92-802878Q55