Mercury 200 OptiMax DTS Manual page 44

8. 1 lever button - Pressing the "1 LEVER" button initiates single lever mode. Single lever mode
enables the throttle and shift functions of both engines to be controlled by the port control handle.
To turn off single lever mode, shift the engine into neutral and press the "1 LEVER" button.
9. Sync button - Pressing the "SYNC" button turns off or on the auto synchronization feature. Refer
to Synchronizing Engines.
a - Neutral LEDS
b - Troll button
c - Transfer button
d - Dock button
10. Control handle tension adjustment screw - This screw can be adjusted to increase or decrease
the tension on the control handle (cover must be removed). This will help prevent unwanted
motion of the handle in rough water. Turn the screw clockwise to increase tension and
counterclockwise to decrease tension. Adjust to tension desired.
11. Detent tension adjustment screw - This screw can be adjusted to increase or decrease the effort
to move control handle out of detent positions (cover must be removed). Turning the screw
clockwise will increase tension. Adjust to tension desired.
a - Detent tension adjustment screw
FEATURES AND CONTROLS
g
a
a
NEUTRAL
TROLL
-
SYNC
TRANSFER
THROTTLE
ONLY
f
e
e - Throttle only
f - 1 lever button
g - Sync button
-
+
ob01170
b - Control handle tension adjustment
screw
36
b
+
c
d
22133
b