KOCOM KCV-802R Operating & Installation Manual page 14

Functional Description
4) CALL TIMES 1 : Make alarm Call one time.
CALL TIMES 2 : Make alarm Call two time.
CALL TIMES 3 : Make alarm Call three time.
5) CAM1 TIME 30SEC : 30 sec. of CAM1 monitoring time.
CAM1 TIME 5 MINUTE : 5Min. of CAM1 monitoring time.
CAM1 TIME 10 MINUTE : 10Min. of CAM1 monitoring time.
6) CAM2 TIME 30SEC : 30 sec. of CAM2 monitoring time.
CAM2 TIME 5 MINUTE : 5Min. of CAM2 monitoring time.
CAM2 TIME 10 MINUTE : 10Min. of CAM2 monitoring time.
3. LCD function
A user can change a Color & brightness level.
LCD
CONTRAST 50
▷
BRIGHTNESS 50
COLOR
50
AUTO ADJUST
Changing Color & brightness. Please, use control key
Selecting AUTO ADJUST, tone of color back to initialization
※Caution : Minimum set point of color is 20
4.Melody function
A user can change melody.
Using control key customer can change melody.
MELODY
CAMERA1 04
CAMERA2 06
LOBBY
16
GUARD
05
INTERPHONE 12
PABX 14
26
LCD
CONTRAST 70
▷
BRIGHTNESS 50
COLOR 50
AUTO ADJUST
CAMERA1
CAMERA2
LOBBY = Common gate phone or Lobby phone
GUARD = Guard master phone
INTERPHONE
PABX = Private Exchanger
※It can select melody No.1~18.
Functional Description
5.Date set up & Image deletes function
Date, time, image data deleting function.
MEMU
TIME : 06:22 AM 22/02/2022
▷▷
FORMAT : YES NO
1) TIME : Changing Date, time using control key
Press menu to set up date and time.
Please, use control key ◁▷ to set up, control key ▽△ to set up the time.
2) FORMAT : Using control key can deletes image.
On format menu, press menu to make set up menu.
Using use left & right control key ◁▷ choosing YES or NO, and press MENU button
(YES : ALL Delets, NO : Cancel).
To Exit menu. Please, press intercom button.
6.Installer Menu (LCD OSD Menu)
1) Installer MENU : Please, press two second of Menu button, and press, door open button to get into
installer menu function.
SYSTEM
SYSTME SW Ver : X.XX
ID
0001
CAMERA1
0
CAMERA2 0
MODE MULTI
PROTOCOL OLD
DOOROPEN
CAMERA
SENSER
NORMAL OPEN
INITIAL
2) SYSTEM SW Ver XXXX : It is Version of Firmware and it can be change without notice.
3) ID0001 : Muliti Apartment ID Mode.
-> In case of 000 ID working as intercom without Call Menu, it will display main Define with ALARM TIME,
ALARM CALL.
-> Depends on unit protocol, it can change with setting up rage.
=> PROTOCOL OLD : 1~63, 100~963, 1000~1963, 2000~3963
=> PROTOCOL New : New protocol set up 1~1599
MEMU
TIME : 06:22 AM 22/02/2022
▷▷
FORMAT : YES NO
※Caution : Wrong set occurs malfunction.
Please, follow manual.
All status can select with control key
27