KOCOM KCV-802R Operating & Installation Manual page 13

Functional Description
Absent Mode
14. Setting/Cancelling the Absent Mode
If a user presses button with the handset
eing hung up, Going-out LED is turned on.
(To turn the LED off, press the button once again.)
1. Security sensor inactive during 60 secs. in absent mode(Time for user to go out of the house)
2. In 60 secs. a user can cancel absent mode
3. Absent mode ON after 60 secs. (security sensor active)
4. When alarming, press button for 2 secs. to cancel the alarm
5. On DEVICE of OSD menu, a user can change absent mode details
6. Alarm call is not made to Private Exchanger
24
Functional Description
OSD function (LCD CONTROL MENU)
Please push menu button for this function. Select and change using
Contents can be changed according to product's version.
1. CALL (push menu button once)
Call to Multi-family Lobby Phone & Segurity Phone and Private Exchanger
CALL
LOBBY1
3
▷
Using set the product an it's ID No. you want to make a call and press
Communication is made available if a user picks up the handset.
※LOBBY = Multi-family Lobby Phone
For making a call to all guard, set the number of GUARD as 99
2. DEVICE (push menu button twice)
DEVICE
SWITCH OFF
ALARM TIME 10MINUTE
ALARM CALL NO
CALL TIMES
2
CAM1 TIME
30SEC
CAM2 TIME 30SEC
1) SWITCH OFF : Devices for each of the connection point are disconnected.
If a user changes it's condition to 'ON', the devices are connected and take action.
※DOOR OPEN on this means DOOR OPEN is set as CAMERA on Installation Menu and a user cannot
control SWITCH OFF/ON.
2) ALARM TIME 10 MINUTES : Alarming for 10 minutes
ALARM TIME 30 MINUTES : Alarming for 20 minutes
ALARM TIME CONTINUE : Continue alarming until cancellation
( * Alarm cancellation: press
3) ALARM CALL NO : Do not make alarm call
ALARM CALL GUARD 1 : Make alarm call to GUARD 1
ALARM CALL GUARD 2 : Make alarm call to GUARD 2
※CAUTION : Alarm call is not made to Private Exchanger
CALL
LOBBY1
5
▷
for 2 secs.)
25