Functional Description - KOCOM KCV-802R Operating & Installation Manual

Functional Description

Communication
1. Call from Gate
A visitor presses CALL button
on gate camera.
Pick up the handset to communicate.
(Available communication time : 3 minutes)
If a use presses button during the communication
with door, the door is opened.
18
"CAMERA1" or "CAMERA2" message is displayed in monitor and tone
ring sounds. (Stand-by time : 30 seconds)
CAMERA 1
Hang up the handset to finish communication.
Functional Description
Communication
2. View of Door Camera Image
On hanging up phone, If a user presses ◁button, the image of
Camera 1 is seen. If a user presses ◁button once again, the image of
Camera 2 is seen.
If a user picks up the handset while viewing the image,
communication is made available. If a user presses
button during the communication, the door is opened.
3. Call from Multi-family Lobby Phone
Lobby/Security LED flickers and tone ring sounds.
If a user presses ◁button once again, this function ends.
(Available image view time : 30 seconds)
※When CAM2 is set as "P"(PIR), monitoring function of
CAM2 does not work.
Above descriptions may vary with the camera setups.
※
Above descriptions is based on a situation that
CAMERA1 and CAMERA2 is turned on ('O') in MENU '
Device.
If a user picks up the handset, communication is made available.
If a user presses button during the communication, common
gate connected to multi-family lobby phone is opened.
19