Advertisement
a. Select the camera that you want to PLAYBACK (W TYPE) press the drop
down arrow and choose PLAYBACK.
b. CLICK on SUBMIT CAMERA SETTINGS icon
c. Enter START time & date and END time & date.
d. CLICK on DATE/TIME SETTING
e. CLICK on PLAYBACK icon (arrow pointing to the right)
Archiving
1. USB Zip Drive directions:
a. Login to the software as a SUPERVISOR or ADMIN level user by
CLICKING on the LOGIN icon on the tool bar.
b. CLICK on the PLAYBACK CONTROL icon on the tool bar (you will
notice the tool bar will change to playback icons)
c. Now CLICK on the SELECT HDD icons (this is your search window)
d. This window will allow you to perform a search on the following:
1. TIME & DATE – enter START time & date and END time &
date (this is the range in time you want the DVR to retrieve from
the HHD), then press the SUBMIT icon and then OK button.
2. EVENT – select an EVENT from the listing and CLICK OK.
3. LOCATION – select HHD number and then set BLOCK,
SECTION and SLICE for START & END and then CLICK OK.
(NOTE: if you receive an error message stating "NO ANY DRIVES"
this means the HDD is not recognized. Make sure the HDD are in the
LOCK position and reboot the DVR)
e. After CLICKING OK on the select HDD page, click on the Camera that
you want to put in PLAYBACK MODE. A gray window will appear in
the middle of the screen place DOT next to PLAYBACK and CLICK
OK.
f. Next CLICK on Archive button.
g. This window will allow you to perform a archive on the following:
1. Select Camera – set the Camera in which you wish to archive.
2. Select Media – select the ZIP drive.
3. Size – by default its set to unlimited.
4. CLICK OK.
h. PRESS the PLAY icon (arrow pointing to the right).
2. CD/RW Drive directions:
a. Login to the software as a SUPERVISOR or ADMIN level user by
CLICKING on the LOGIN icon on the tool bar.
b. CLICK on the PLAYBACK CONTROL icon on the tool bar (you will
Quick Reference
4
Advertisement
