Advertisement
Setup
1. Click on the Login icon to login in as an administrator. The factory default
Login for an administrator is admin. The factory default Password for an
administrator is admin.
2. Click on the System Time in order to change to your local time. The Date
format is in YYYY/MM/DD. The Time format is in Military Time.
3. Click on the Configure icon to setup the system.
a. Change the Time Type, Day Type, and Calendar Type menus to
correspond to the way in which you want your system to run.
b. Setup the Alarm Action, Motion Action, Vloss Action, and HDD's Full
Action menus specific to your application.
(NOTE: Defaults set within the system are set to the standards of most
applications.)
c. Setup the Camera menu for those cameras installed to the system. Setup
Behaviors For Each Camera submenu to modify how the camera should
act in regards to different applications. Setting the Compression Method
to JPEG quality provides a better picture quality but it uses up more hard
drive space. Setting the Compression Method to MPEG quality provides
a lower picture quality but uses less hard drive space.
Recording rate is for normal situation recording and Alarm Recording
rate is when some form of alarm or motion happens.
d. Setup the Alarm Inputs and Alarm Outputs to match up with those
required by your application.
e. Setup the Display Sequences and Display Pages to change the camera
and text color in each video window for your applications.
f. To setup Motion detection simple click on the Motion menu. The defaults
set within the system are set to standard motion detection, which should be
standard for most applications. The recording frame rate is not influenced
by motion detection for the DVR.
g. Click the Set Password menu to setup a new password and keep the
password in a safe place.
4. Once you have completed the step provided above click the Exit menu and restart
the system for those new settings to take effect.
Quick Reference
2
Normal
Advertisement
