Advertisement
Blacking Out Live Video
1. To black out the live images from the cameras. Login as an Administrator and set
the cameras in Playback mode within the Sequence Mode display or Static Page
Mode display. There are 7 Static Display pages and at most 8 display sequences.
The Operator/Guest will not be able to view the live images from those cameras.
Recording
1. To setup Time Lapse Recording, just setup the Normal Recording rates for the
Cameras at different Time Types.
2. To setup Event Recording, setup the Alarm Recording rates for the Cameras at
different Time Types along with the different Actions. Also enable or disable
items for the Cameras as well as the Alarm Inputs.
Playback & Retrieval
1. Console directions:
a. Login to the software as a SUPERVISOR or ADMIN level user by
CLICKING on the LOGIN icon on the tool bar.
b. CLICK on the PLAYBACK CONTROL icon on the tool bar (you will
notice the tool bar will change to playback icons)
c. Now CLICK on the SELECT HDD icon (this is your search window)
d. This window will allow you to perform a search on the following:
1. TIME & DATE – enter START time & date and END time &
date (this is the range in time you want the DVR to retrieve from
the HHD), then press the SUBMIT icon and then OK button.
2. EVENT – select an EVENT from the listing and CLICK OK.
3. LOCATION – select HHD number and then set BLOCK,
SECTION and SLICE for START & END and then CLICK OK.
(NOTE: if you receive an error message stating "NO ANY DRIVES"
this means the HDD is not recognized. Make sure the HDD are in the
LOCK position and reboot the DVR)
e. After CLICKING OK on the select HDD page, click on the Camera that
you want to put in PLAYBACK MODE. A gray window will appear in
the middle of the screen place DOT next to PLAYBACK and CLICK
OK.
f. PRESS the PLAY icon (arrow pointing to the right)
2. Remote direction:
Quick Reference
3
Advertisement
