Nikon ECLIPSE TS100 Instructions Manual page 22

5
Select the desired NAMC objective.
Turn the revolving nosepiece and place the NAMC
objective having the desired magnification in the
optical path. (Turn the revolving nosepiece until
you feel it click in place.)
6
Place the slit diaphragm
corresponding to the objective in
the optical path.
Place the slit diaphragm having the same NAMC
code as the objective in the optical path and
observe.
Depending on the specimen, changing the direction
of the contrast may make easier observation.
Change the direction of the specimen by rotating
the container, or change the direction of the
modulator and slit diaphragm as necessary.
7
Adjust the correction ring of the
objective.
If the objective has a correction ring, adjust the
ring according to the thickness of the container. For
details on adjusting this correction ring, see P.27.
3 Microscopy
1-2 Modulation Contrast (NAMC) Microscopy
E-21
Place the slit diaphragm having
the same NAMC code as the
objective in the optical path.