Sony VPH-G90E Installation Manual page 67

DELETE
Deletes an unnecessary input memory number.
Select DELETE... in the INPUT MEM. OPTION
menu and press the ENTER key. The DELETE
display appears, and the currently selected input
memory number and the information of the stored
signal are displayed.
Specify the input memory number you want to delete
with the B or b key.
I N P U T - A
D E L E T E
N o . 1 2
I N P U T - A
3 1 . 4 0 K H z
5 9 . 9 9 H z
R G B
H / C : P V : P
S o n G : N ADJ :
SET: ENTER
D E L E T E N o . 1 2
EXIT: MENU
After specifying, press the ENTER key. The
following display appears.
D E L E T E
N o . X X X
A r e y o u s u r e
t o d e l e t e
I N P U T M E M .
N O . X X X ?
SEL: SET: ENTER EXIT: MENU
Press the v or V key to select YES, then press the
ENTER key. The specified input memory number is
deleted from the memory and the DELETE display is
resumed.
If you select NO, the specified number is canceled
and the DELETE display is resumed.
Notes
You cannot delete the following input memory
numbers.
• Original Input Memory No. 00 to 12 (to which data
are preset at the factory)
• Memory-protected numbers (displayed in red)
• Non-existent memory numbers (displayed in yellow)
• Memory number specified as LOAD when MEM.
LOAD/SAVE is set to MANUAL
Y E S
N O
PROTECT
Protects the data of a specified input memory number
from deleting.
Select PROTECT... in the INPUT MEM. OPTION
menu and press the ENTER key. The PROTECT
display appears, and the currently selected input
memory number and the information of the stored
signal are displayed.
Specify the input memory number you want to protect
with the B or b key.
P R O T E C T
N O . X X X
A r e y o u s u r e
t o p r o t e c t
I N P U T M E M .
N O . X X X ?
SEL: SET: ENTER EXIT: MENU
After specifying, press the ENTER key. The
following display appears.
P R O T E C T
N O . X X X
A r e y o u s u r e
t o p r o t e c t
I N P U T M E M .
N O . X X X ?
SEL: SET: ENTER EXIT: MENU
Press the v or V key to select YES, then press the
ENTER key. The data of the specified input memory
number is protected and the PROTECT display is
resumed. The protected input memory number is
displayed in red.
If you select NO, the specified number is canceled
and the PROTECT display is resumed.
Y E S
N O
Y E S
N O
67
Before adjustment (GB)