Sony VPH-G90E Installation Manual page 31

Setting up
• Set the IN/OUT selector on the IFB-12/12A to OUT (output). The signal
input to INPUT A is output from the IFB-12/12A.
• Set the device index number of the first projector which is connected
directly to the video equipment or computer to "01," and the second
projector to "02"
(page 142
• Switch the 75-ohm terminate connectors on the BA board according to
the connections of the computer and color monitor.
For details, see "Switching the 75-ohm Terminate Connectors" on page 27
• When using the remote commander as a wireless remote control, activate
the remote control detector of a piece of the equipment in the system only
and deactivate those of the other equipment. Perform the setting on the
projector using "SIRCS RECEIVER" in the SET SETTING 2 menu
.
64 )
(GB)
).
(GB)
.
(GB)
(page
31
Connections (GB)