The Pic Ctrl (Picture Control) Menu - Sony VPH-G90E Installation Manual

The PIC CTRL (Picture Control)
Menu
(User/Pro-user/Service/Expert modes)
The PIC CTRL menu is used for adjusting the picture.
Items that can be adjusted are highlighted in green.
You cannot select the items indicated in white.
V I D E O M E M O R Y
PIC
CTRL N o . 1 0
1 6 : 9 N T S C S I G N A L
SET
SETTING1 C O N T R A S T
B R I G H T
SET
SETTING2 C O L O R
H U E
INPUT
INFO. S H A R P
SEL: SET: ENTER
VIDEO MEMORY
Selects the number of video memory 1 to 10.
V I D E O
V I D E O M E M O R Y
PIC
CTRL
N o . 1 0
1 6 : 9 N T S C S I G N A L
SET
SETTING1
C O N T R A S T
B R I G H T
SET
SETTING2
C O L O R
H U E
INPUT
INFO. S H A R P
SEL: SET: ENTER
EXIT: MENU
The video memory is a part of the SET MEMORY,
and stores 10 types of the aspect ratio, picture quality,
etc.
Select a video memory number 1 to 10, then the
aspect ratio and picture quality that you adjust will be
stored in the selected video memory.
If you want to use the aspect ratio and picture quality
data stored in the INPUT MEMORY, select OFF.
For details, see "Video Memory" on page 137
Contents of the video memory data
COLOR TEMPERATURE, D. PICTURE, V SHIFT,
WIDE/NARROW, COMPONENT FORMAT, COMB
FILTER, DRC LEVEL, CONTRAST, BRIGHT,
COLOR, HUE, SHARP, RGB SIZE, RGB SHIFT,
BLANKING
V I D E O
8 0
5 0
5 0
5 0
5 0
EXIT: MENU
8 0
5 0
5 0
5 0
5 0
.
(GB)
To select the number of video memory
After selecting VIDEO MEMORY, press the b or
ENTER key. The following VIDEO MEMORY select
menu appears. Select the desired number with the v
and V keys, then press the B or ENTER key.
Z
V I D E O M E M O R Y
4
N o . L A B E L
1 4 : 3 S T S C S I G N A L
2 1 6 : 9 N T S C S I G N A L
3 4 : 3 S E C A M S I G N A L
4 1 6 : 9 S E C A M S I G N A L
5 4 : 3 P A L S I G N A L
6 1 6 : 9 P A L S I G N A L
7 4 : 3 P A L - M S I G N A L
8 1 6 : 9 P A L - M S I G N A L
SEL: SET: ENTER
EXIT: MENU
Aspect ratios preset at the factory
The data for the following aspect ratios have been
stored in each video memory number at the factory.
No. Aspect ratio
1 4 : 3
2 4 : 3
3 4 : 3
4 4 : 3
5 4 : 3
6 16 : 9
7 16 : 9
8 16 : 9
9 16 : 9
10 16 : 9
To change the video memory label (in Pro-
user/Service/Expert modes only)
You can change the label of the video memory to
match the memory contents.
When the VIDEO MEMORY select menu is
displayed, select the number you want change its label
and press the b key. The following display appears.
[ 4 : 3 N T S C S I G N A L ]
A B C D E F G H I J K L M N
O P Q R S T U V W X Y Z .
0 1 2 3 4 5 6 7 8 9 - _ * :
N n OK CANCEL
SEL: SET: ENTER EXIT: MENU
Move the cursor to the desired letter with the v/V/B/b
keys, then press the ENTER key. The selected letter is
displayed in the [ ] at the top of the screen. You can
select up to 18 letters by repeating the same procedure.
After selecting the letters, move the cursor to OK, then
press the ENTER button. The display is returned to
the VIDEO MEMORY select menu.
55
Before adjustment (GB)