Adjusting The White Balance - Sony VPH-G90E Installation Manual

Adjusting the White Balance

Selecting the screen type
Setting the color temperature
4
Press the MEMORY key to save the adjustment data.
Note
When you connect multiple input sources to the projector, such as when
using the switcher, adjust the picture size, picture shift and blanking for
each input signal. The information about the input signal is shown in the
INPUT INFO menu.
The color temperatures are preset at the factory to 9300K, 6500K, 5400K
and 3200K for two types of screen, respectively. However, if you change
these levels or set a color temperature other than the factory preset levels,
you can adjust the white balance and save it in the memory.
Select the type of screen in use: bead screen or mat screen.
1
Display the SERVICE SETTING 1 menu.
Press the MENU key, select SERVICE SETTING 1 by pressing the v
or V key, and press the ENTER key.
2
Press the v or V key to select SCREEN TYPE, then press the ENTER
key.
3
Press the v or V key toe select SCREEN B for bead screen or
SCREEN M for mat screen, then press the ENTER key.
S I N P U T - A
S C R E E N T Y P E :
SET
SETTING2 S C R E E N B
A B G M O D E : O N
INPUT
INFO. N O R M A L D E F O C U S
M O D E : O N
SET
INFO 5 B N C M O D E : O F F
SERVICE
SETTING1
SERVICE
SETTING2
SEL: SET: ENTER
EXIT: MENU
1
Display the INPUT SETTING menu.
Press the MENU key, select INPUT SETTING with the v or V key,
then press the ENTER key.
2
Press the v or V key to select COLOR TEMP, then press the ENTER
key.
(continued)
125
Adjustments (GB)