(Gb); The Input Mem. (Memory) Option Menu - Sony VPH-G90E Installation Manual

Using the MENU
The INPUT MEM. (memory)
OPTION Menu
(Expert mode)
This projector is provided with the INPUT MEM.
OPTION menu especially for the expert service
personnel. To display the INPUT MEM. OPTION
menu in the expert mode, first enter into the expert
mode. Then display the INPUT INFO menu and press
the b key.
I N P U T M E M . O P T I O N
M E M . L O A D / S A V E :
L O A D S A V E
n
N o . 0 N o . 1 2
D E L E T E . . .
P R O T E C T . . . P R O T E C T
SEL: SET: ENTER
For details on the input memory, see "Input Memory" on
page 133 .

(GB)

MEM. LOAD/SAVE
Specifies the input memory number to be loaded or
saved.
I N P U T - A
I N P U T M E M . O P T I O N
M E M . L O A D / S A V E :
A U T O
L O A D S A V E
n
N o . 0 N o . 1 2
D E L E T E . . .
P R O T E C T . . . P R O T E C T
SEL: SET: ENTER
EXIT: MENU
AUTO: Set to this position to select the input memory
number to be loaded or saved automatically
according to the type of input signal. This position
is selected at the factory.
MANUAL: Set to this position to specify the input
memory number to be loaded or saved. This
position is useful when the loaded input memory
number is unstable because there are two or more
input signals whose frequencies are very similar, or
when you want to assign a specified input memory
number for the specified input source, or when you
want to save the adjusted data to the specified
input memory number.
When MANUAL is selected, "LOADnSAVE"
becomes selectable.
Note
The MEM. LOAD/SAVE setting is reset to AUTO
once the projector is turned off.
66
(GB) Before Adjustment
I N P U T - A
A U T O
EXIT: MENU
LOADnSAVE
Specifies the input memory numbers to be loaded and
saved when MEM. LOAD/SAVE is set to MANUAL.
Press the v or V key to select LOAD or SAVE, and
specify the desired input memory number with the B
or b key.
I N P U T - A
L O A D n S A V E
N o . 3 N o . 1 2
I N P U T - A I N P U T - A
3 1 . 4 0 k H z 3 1 . 4 0 k H z
5 9 . 9 9 H z 5 9 . 9 9 H z
R G B R G B
H / C : P V : P H / C : P V : P
S o n G : N S o n G : N
L O A D N o . [ 3 ] SEL:
SET: ENTER
S A V E N o . 1 2
EXIT: MENU
ADJ :
After specifying, press the ENTER key. The
following display appears.
L O A D n S A V E
N o . 3 N o . 1 2
A r e y o u s u r e t o
s e t t o a c c e s s
I N P U T M E M .
N O . 3 n 1 2 ?
SEL: SET: ENTER EXIT: MENU
N e w I N P U T M E M .
Press the v or V key to select YES, then press the
ENTER key. The specified input memory numbers are
stored in memory and the INPUT MEM. OPTION
menu is resumed.
If you select NO, the specified numbers are canceled
and the INPUT MEM. OPTION menu is resumed.
Notes
• You cannot specifiy a non-existent memory number
(displayed in yellow) as LOAD, or a memory-
ptotected number (displayed in red) as SAVE.
• When MEM. LOAD/SAVE is set to MANUAL, the
specified input memory numbers are effective even if
the input signal or the input channel changes.
• Before you reset MEM. LOAD/SAVE from
MANUAL to AUTO, press the MEMORY key to
save the data stored in the memory number specified
as LOAD to the memory number specified as SAVE.
Y E S
N O