Aastra 6751i RP Administrator's Manual page 52

3 Click Browse to find the upgrade package on your computer. A table displays detailed information about the upgrade
package you selected including the new version number, the release date of the package, and the number of your devices
that apply to this upgrade package.
4 Click Upgrade all devices to which this package applies, and click Next.
5 On the Confirmation and warnings page, review the devices in the Devices to be upgraded list, and read the cautionary
information regarding the upgrade process.
6 Click Upgrade to start the process. Do not disturb the devices during the upgrade. Each device may take several minutes
for Response Point to upgrade.
7 The Upgrading device firmware page shows you the status of every device—whether the upgrade started, succeeded,
failed, or is still in progress. When the process finishes, if you only want to see devices that failed, select the Show only
failed upgrades in the list check box.
8 When the upgrade is complete, a message displays indicating Administrator has finished the upgrade process.
9 The upgrade report can be saved as a text file by clicking Save Report...
Upgrade Selected Device Firmware Using Administrator
To upgrade individual devices do the following.
Note: Upgrading will disrupt phone service, so don't begin an upgrade during business hours.
1 From within the Administrator software, click the Phone System button.
2 Click Upgrade Device Firmware under the heading Other.
3 Click Browse to find the upgrade package on your computer. A table displays detailed information about the upgrade
package you selected including the new version number, the release date of the package, and the number of your devices
that apply to this upgrade package
46 AastraLink RP System Administrator Guide