Aastra 6751i RP Administrator's Manual page 13

Hide thumbs Also See for 6751i RP:

Table of Contents

3 Choose your base unit. If more than one is shown, check the MAC address on the bottom sticker on your base unit. The

first time you connect, a security screen appears.

4 Confirm that the correct MAC address for your base unit is displayed, and click Yes to continue. A security warning

screen appears.

5 Click Yes to accept the security certificate. The Connect to Base Unit dialog appears.

6 Enter the default password admin and click Connect. The change password now dialog appears.

The base unit is now connected to the Microsoft Response Point Administrator software. Change the password now, or do

so from the main menu at a later time.

Note: If you ever forget your password, you can reset the AastraLink RP 500 Base Unit password using the Microsoft Utility

provided. See Resetting the AastraLink RP 500 Base Unit Password on page 51.

To add phones to your AastraLink RP Solution, follow the steps given in Adding Phones on page 15.

Aastra

AastraLink RP System Administrator Guide 7

Table of Contents

Troubleshooting

6753i rp 6757i ct rp Ct cordless