Zone Programming (Section 0); Nac Temporal/Steady Programming (Section 1); Nac Auto-Silence, Strobe Programming (Section 2) - Secutron MR-2602 Installation Manual

8.2 Zone Programming (Section 0)

Program each of the zones as one of the following types. (See "Zone Programming (Section 0)" on page 24.)
Record your programming choices in the table below.
ZONE
Zone
ALARM
No.
LED On
1 1
2 2

8.3 NAC Temporal/Steady Programming (Section 1)

Please see "NAC Temporal/Steady Programming - Section 1 ('NAC1' LED on steady)" on page 25.
ZONE
ALARM Programming Section
LED On
1 NAC1 Temporal / Steady
2 NAC2 Temporal / Steady
* = Factory default

8.4 NAC Auto-silence, Strobe Programming (Section 2)

Please see "NAC Auto-silence and Strobe Programming - Section 2 ('NAC2' LED on steady)" on page 25.
ZONE
ALARM
LED On
1 NAC Auto-silence
2 NAC2 Strobe or Bell
* = Factory default
Type
(00 -
05)
Programming Section
MR-2602 Installation & Operator's Manual
Label
Settings
Temporal *Steady
Temporal *Steady
Settings
Enabled *Disabled
Strobe *Bell
31