Installing The Mr-2602 Fire Panel; Environmental Specifications; Panel Assembly And Modules Locations; Figure 5: Panel Assembly And Modules Locations - Secutron MR-2602 Installation Manual

MR-2602 Installation & Operator's Manual

3.0 Installing the MR-2602 Fire Panel

3.1 Environmental Specifications

Consider the following conditions when selecting a mounting location for the MR-2602 panel:
•Operating temperature: 32°F to 122°F / 0°C to 50°C
•Humidity: 95% RH non-condensing
•Close to a source of unswitched AC power

3.2 Panel Assembly and Modules Locations

The panel comes completely assembled from the factory. Remove the lower dead front for access to the
battery compartment. Remove display control panel for access to AC connections.

Figure 5: Panel Assembly and Modules Locations

8
Primary AC
240V 50Hz
120V 60Hz
N
GND