Connecting The Headset - Siemens Gigaset E490 Manual

Hide thumbs Also See for Gigaset E490:
Table of Contents

Advertisement

Display in idle status
Once the phone is registered and the time set, the idle display is shown as in
this example.
Displays
¼
Eco Mode + activated (
½
Eco Mode activated (
Charge status of the batteries:
= e V U (flat to full)
= flashes: batteries almost flat
Internal name of the handset
INT 1
¢
(
page 44)
If Eco Mode + (
the quality of the radio contact between the base station and handset:
Good to poor: Ð i Ñ Ò
u
No reception: | flashes
u
Your phone is now ready for use!

Connecting the headset

A compatibility list of tested headsets can be found on the Internet at:
www.plantronics.com/productfinder.
¢
page 40)
¢
page 40)
¢
page 40) is not activated, the top left of the display shows
After removing the rubber cover, you can
connect a headset to the underside of
your telephone with the 2.5 mm jack con-
nector. HAMA and Plantronics M40,
MX100 and MX150 headsets are all suita-
ble.
After using the headset, always replace
the rubber cover.
First steps
¼
½
V
INT 1
01.10.09
07:15
INT
SMS
13

Advertisement

Table of Contents
loading

Table of Contents