Making an external call
External calls are calls using the public tel-
Enter the number and press
the talk key.
Press and hold the talk key
c and then enter the
You can cancel the dialling operation with
the end call key a.
You are shown the duration of the call
while the call is in progress.
Dialling using the directory, the call-by-
call list (
calls and last number redial list
page 28) saves you
from having to re-enter numbers and
network provider prefixes ("call-by-call
Ending a call
Press the end call key.
Answering a call
The handset indicates an incoming call in
three ways: by ringing, by a display on the
screen and by the flashing speaker key
You can accept the call by:
Pressing the talk key c.
Pressing the speaker key d.
Press the display key
If the handset is in the charging cradle and
function is activated
page 47), the handset will take a call
automatically when you lift it out of the
page 26) or the
To deactivate the ringer, press the
display key. You can take the call as long as
it is displayed on the screen.
Calling Line Identification
When you receive a call, the caller's
number is displayed on the screen if the
following conditions are met:
Your network provider supports CLIP,
– CLI (Calling Line Identification): the
caller's number is transmitted.
– CLIP (Calling Line Identification Pres-
entation): the caller's number is dis-
You have arranged CLIP with your net-
The caller has requested CLI from the
Call display with CLIP/CLI
If the caller's number is saved in your
directory, the caller's name will also be dis-
1 Ringer icon
2 Number or name of caller
The following is displayed in place of the
External, if no number is transmitted.
Unavailable, if the caller has not
arranged Calling Line Identification.