Table of Contents
Advertisement
Warning
u
You should always check the
operation of the room monitor
before use. For example, test its
sensitivity. Check the connection
if you are diverting the room
monitor to an outside number.
u
When the function is switched on,
the handset's operating time is con-
siderably reduced. If necessary,
place the handset in the charging
cradle. This ensures that the batter-
ies do not run down.
u
Ideally the handset should be posi-
tioned 1 to 2 metres away from the
baby. The microphone must be
directed towards the baby.
u
The connection to which the room
monitor is diverted must not be
blocked by an activated answering
machine.
Activating the room monitor and
entering the destination number
¢
¢
v
í
Room Monitor
¤
Change multiple line input:
Room M.
Select
to activate.
On
Call to
Press the display key
tination number.
External number: Select number from
the directory or enter directly. Only the
last 4 digits are displayed.
Internal number:
handset or
Call All
sets are to be called)
Store number with
Level
Set noise level sensitivity
¤
Press
to save the settings.
§Save§
and enter des-
§Edit§
¢
s (select
§INT§
if all registered hand-
¢
.
§OK§
.
§Save§
(Low
or High).
Using a handset as a room monitor
Changing a set external destination
number
¢
¢
v
í
Room Monitor
s
Scroll to the
Press the display key.
§Edit§
X
Delete existing number.
¤
Enter number as described in "Activat-
ing the room monitor and entering the
destination number" (
¤
Press
to save the settings.
§Save§
Changing a set internal destination
number
¢
¢
v
í
Room Monitor
s
Scroll to the
Press the display key.
§Delete§
Press the display key.
§Edit§
¤
Enter number as described in "Activat-
ing the room monitor and entering the
destination number" (
¤
Press
to save the settings.
§Save§
Deactivating the room monitor
remotely
Preconditions: The phone must support
tone dialling and the room monitor should
be set for an external destination number.
¤
Accept the call from the room monitor
and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room moni-
tor settings (e.g. no ringer) on the handset
will remain activated until you press the
display key
on the handset.
§OFF§
To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
¢
with
(
page 45).
§Save§
Call to
line.
¢
page 45).
Call to
line.
¢
page 45).
45
Advertisement
Table of Contents
