P0-3 Grease The Extendable Axles - S-100, S-105, S-120 And S-125 - Genie S-40 Maintenance Manual

April 2016
P0-3
Grease the Extendable Axles -
S-100, S-105, S-120, S-125,
S100HD and S-120HD
Manufacturer specifications require that this
procedure be performed every 50 hours.
Lubricating the front and rear axles helps to ensure
the smooth operation of the axles over the lifetime
of the product. Two fittings on each axle are
provided to apply grease the top and bottom
sliding wear pads.
1 Locate the grease fittings on the extendable
axles covers.
1 Top wear pad grease fitting
2 Side wear pad grease fitting
2 Thoroughly pump grease into each grease
fitting. When grease is pumped into each
fitting, a hose directs this lubrication to the top
or bottom wear pad.
3 Cycle the extending axles in and out.
Note: Genie recommends that the extending axles
be cycled in and out at least once a week.
Part No. 1268489
Programmed Maintenance Procedures
S Booms • Z Booms
Maintenance Manual
113