Genie S-40 Maintenance Manual page 100

Maintenance Manual
Quarterly Maintenance Procedures
8 Activate and hold the aircraft protection
override switch.
9 Activate each function control handle or toggle
switch.
Result: All boom, drive and steer functions
operate.
10 Fully retract the primary boom.
11 Raise the primary boom to 5° above
horizontal.
12 Move the yellow bumper at the bottom of the
platform 4 inches / 10 cm in any direction.
13 Activate each function control handle or toggle
switch.
Result: No boom, drive or steer functions
operate.
14 Activate and hold the aircraft protection
override switch.
15 Activate each function control handle or toggle
switch.
Result: All boom, drive and steer functions
operate.
16 Lower the primary boom to the stowed
position.
88
Articulated (Z) Booms:
17 Raise the secondary boom approximately 3 ft
/ 1 m.
18 Move the yellow bumper at the bottom of the
platform 4 inches / 10 cm in any direction.
19 Activate each function control handle or toggle
switch.
Result: No boom, drive or steer functions
operate.
20 Activate and hold the aircraft protection
override switch.
21 Activate each function control handle or toggle
switch.
Result: All boom, drive and steer functions
operate.
22 Lower the secondary boom to the stowed
position.
S Booms • Z Booms
April 2016
Part No. 1268489