Notes On Usb - Sony STR-DH770 Manual

When connecting a USB device to the receiver, be sure to connect after the display "Creating
Library" or "Creating Database" on the USB device has disappeared.
[51] Enjoying Video and Sound
Notes on USB devices
Do not remove a USB device during operation. To avoid data corruption and damage to the
USB device, turn the receiver off when connecting or removing a USB device.
Do not connect a USB device to the receiver through a USB hub.
When a USB device is connected, [READING] appears.
It may take about 10 seconds before [READING] appears depending on the type of USB
device connected.
When a USB device is connected, the receiver reads all of the files on the USB device. If
there are many folders or files on the USB device, it may take a long time to finish reading
the USB device.
The receiver can recognize the following files or folders in USB devices:
folder paths up to 128 characters long
200 folders (including the root folder)
150 audio files in each folder
The maximum number of audio files and folders may vary depending on the file and folder
structure. Do not save other types of files or unnecessary folders on a USB device.
Compatibility with all encoding/writing softwares, recording devices, and recording media
cannot be guaranteed. Incompatible USB devices may produce noise or interrupted audio
or may not play at all.
Some time may be needed to start playback when:
the folder structure is complex.
the memory capacity is excessive.
This receiver does not necessarily support all of the functions provided in a connected USB
device.
The playback order for the receiver may differ from the playback order of the connected
USB device.
If a USB device that has no audio files is connected, [NO TRACK] appears on the display
panel.
When playing a very long track, some operations may cause playback delay.
[52] Enjoying Video and Sound
Listening to FM radio
You can listen to FM broadcasts through the built-in tuner. Scan the radio frequencies by the
following procedure to tune in to a station automatically. Be sure that the FM wire antenna
(aerial) is connected to the receiver before performing this operation.
Select [Listen] - [FM] from the home menu.
1
The FM screen appears.
Press and hold or
2
screen.
The receiver automatically scans the radio frequencies and stops scanning whenever a
station is received.
Playing content from a USB device
Listening to the radio
until the frequency digits begin to change on the FM