Sony STR-DH770 Manual page 71

[97] Adjusting Settings Level Settings
Adjusting the speaker level (Level)
You can adjust the level of each speaker (front left/right, front high left/right, center, surround
left/right, surround back left/right and subwoofer).
Select [Speaker Setting] from the home menu.
1
Select [Level].
2
3 Select the speaker on the screen for which you want to adjust the speaker level.
Adjust the level.
4
Note
When one of the sound fields for music is selected, no sound is output from the subwoofer if [Size]
for all of the speakers are set to [Large] in the [Speaker Setting] menu. However, sound will be
output from the subwoofer if:
the digital input signal contains LFE signals.
[Size] for the front or surround speakers are set to [Small].
[MULTI ST.], [PLII MV], [PLII MS], [PLIIX MV], [PLIIX MS], [HD-D.C.S.] or [A. ENHANCER] is
selected.
If headphones are connected, you can only set [Level] for [Front Left] and [Front Right].
Hint
You can also adjust the level of each speaker from the [<LEVEL>] menu on the display panel.
[98] Adjusting Settings Speaker Settings
Selecting the speaker pattern (SP PATTERN)
You can select the speaker pattern according to the speaker system which you are using.
This operation is only available using the display panel on the front of the receiver.
Press AMP MENU.
1
Select [<SPEAKER>] - [SP PATTERN] on the display panel.
2
3 Select the speaker pattern you want.
Select the speaker pattern according to the speaker configuration.
[99] Adjusting Settings Speaker Settings
Assigning the surround back speaker terminals
(Surround Back Speakers Assign)