Sony STR-DH770 Manual page 33

Press (power) to turn on the receiver.
2
You can also turn on the receiver using
receiver, press (power) again.
Note
After you turn off the receiver, [STANDBY] flashes on the display panel. Do not disconnect the AC
power cord (mains lead) while [STANDBY] is flashing. This may cause a malfunction.
[33] Preparation 6. Setting up the receiver using Easy Setup
Setting up the receiver using Easy Setup
When you turn on the receiver for the first time or after the receiver is initialized, the Easy Setup
screen appears on the TV screen. You can set up the following settings for the receiver by
following the instructions on the Easy Setup screen.
Language
Select the language of messages on the screen.
Surround Back Speakers Assign
You can set the assignment for the SPEAKERS SURROUND BACK/BI-AMP/FRONT
HIGH/FRONT B terminals.
Auto Calibration
The Auto Calibration function checks and measures the speakers and the environment to
adjust various settings for optimum listening condition.
Note
Switch the input of the TV to the input to which the receiver is connected to use this function.
If the Easy Setup screen does not appear or you want to display the Easy Setup screen
manually, you can display it by pressing HOME to display the home menu, then selecting [Easy
Setup].
(power) on the remote control. To turn off the