Sony STR-DH770 Manual page 58

function needs to be turned on separately for the receiver and the connected device.
This operation is only available using the display panel on the front of the receiver.
Press AMP MENU.
1
Select [<HDMI>] - [CTRL HDMI] on the display panel.
2
3 Select [CTRL ON].
The Control for HDMI function of the receiver is turned on.
Press AMP MENU to exit the menu.
4
Select the HDMI input of the TV to the input to which the receiver is connected using
5
the TV remote control to display the settings menu of the TV.
Turn on the Control for HDMI function of the TV.
6
For details on settings for the TV, refer to the operating instructions supplied with the TV.
Turn on the Control for HDMI function of the connected devices.
7
For details on setting the connected device, refer to the operating instructions of the
respective devices.
Note
Perform the steps above again if you unplug the HDMI cable or change the connection.
[72] Using Other Features
Turning off the receiver and connected devices
simultaneously with the TV (System Power Off
function) (STBY LINK)
You can turn off the receiver and connected device automatically when you turn off the TV.
This operation is only available using the display panel on the front of the receiver.
Press AMP MENU.
1
Select [<HDMI>] - [STBY LINK] on the display panel.
2
Select the setting you want.
3
AUTO ： When the input of the receiver is set to [TV], [BD/DVD], [GAME], [SAT/CATV],
or [VIDEO], the receiver will turn off when the TV is turned off.
ON ： The receiver will turn off when the TV is turned off, regardless of the input of the
Interlocking with BRAVIA TV and other devices ("BRAVIA" Sync)