Sony STR-DH770 Manual page 84

Select the input name you want to apply the setting.
3
Select the setting you want.
4
STANDARD: If you do not receive high resolution 4K signals, select [STANDARD].
ENHANCED: If you want to receive high resolution 4K signals, such as 4K/60p 4:4:4,
4:2:2, and 4K/60p 4:2:0 10 bit, etc., select [ENHANCED].
Note
When [ENHANCED] is selected, we recommend using a Premium High Speed HDMI Cable with
Ethernet, which can support bandwidth up to 18 Gbps.
When [ENHANCED] is selected, some devices (cable box or satellite box, Blu-ray Disc player, and
DVD player) does not work properly. In this case, select [STANDARD].
If your TV has similar menu for high bandwidth video format, check the setting on the TV menu when
you select [ENHANCED] on this receiver. For details on the setting of the TV menu, refer to the
operating instructions of the TV.
For details about the high bandwidth video format, refer to "Supported video formats" in "About HDMI
connections."
[122] Adjusting Settings Bluetooth Settings
Setting the Bluetooth Standby mode (BT STANDBY)
You can set the Bluetooth Standby mode so that the receiver can be controlled by a
BLUETOOTH device even when the receiver is in standby mode.
This operation is only available using the display panel on the front of the receiver.
Press AMP MENU.
1
2 Select [<BT>] - [BT STANDBY] on the display panel.
Select the setting you want.
3
STBY ON: You can turn on the receiver from a BLUETOOTH device.
STBY OFF
Note
If a previously paired device is paired when the receiver is in standby mode, the
on the front panel lights up in amber if [BT STANDBY] is set to [STBY ON].
You can only select this parameter when a BLUETOOTH device is paired.
[123] Adjusting Settings Bluetooth Settings
Setting BLUETOOTH audio codecs (BT AAC)
You can enable and disable AAC (Advanced Audio Coding) audio.
This operation is only available using the display panel on the front of the receiver.
(power) indicator